Best answer


on a bobcat the hi flow option must be turned on throughservice analyzer software(available to dealers only) all LH panels are the same, so the button is there for that option. if the light comes on it probably has hi flow installed. the machine may have a hi flow decal on the rear uprights, or somewhere near the hyd couplers.

People also ask


  • How do I know if my Bobcat 753 is high flow?

  • Model: 753. Type: Skid Steer Loader. Years manufactured: 1990 鈥?2002. One may also ask, how do I know if my bobcat is high flow? Bobcat doesn’t make it very obvious, other than a little sticker on some machines. If you can run it, push the high flow button and if it lights up, it has it, if not it’s probably standard flow.

  • How do I know if my skid steer is high flow?

  • How Do I Know If My Skid Steer Is High Flow? You may hear the term high flow in relation to a great many different types of skid loaders that have various degrees of flow and pressure. Flow may range from 26 鈥?40 GPM (gallons per minute). Pressure levels range between 3,000 to 5,000 PSI (pounds per square inch).

  • How do I know what year my bobcat is?

  • How do I know what year my bobcat is? 1 Locate the VIN or serial number on your Bobcat. It might be located in several places, like on the side of the door or… 2 Look through the Owner’s Manual for the VIN/serial number. 3 Write down all of the numbers that appear in the Owner’s Manual or on the skid steer. More …

  • How do I know if my machine is high flow or low flow?

  • On standard flow machines, the touchpad key will not light up, when pushed, unless high-flow software is activated, and that can only be done with proprietary software. If you start the machine and hit the high-flow button and it lights up, chances are, it is a high-flow.